How to install solar panel on Metal Roof Sheet   Metal Roof is one of the common roofs in life. It is commonly used in relatively large buildings such as factories and warehouses. This roof is also applied in family houses. How to install solar components safely on this roof is one of the important issues of photovoltaic support installation.   Metal Roof Sheet can be divided into Trapezoidal Root Sheet, Corrugated ROOF Sheet, Standing Seam ROOF Sheet, etc. We can adopt different solar bracket solutions according to its roof shape. Different shape installation methods are similar. Sometimes the same installation method is also suitable for different shapes of ROOF Sheet. Now we mainly discuss different installation methods with TRAPEZOIDAL ROOF Sheet:   1. Trapezoidal ROOF Sheet This roof can usually be connected to the metal roof with L feet. In order to prevent the waterproof, the EPDM rubber pads are needed to prevent water leakage. Sometimes in order to increase the distance between solar panel and roofs, we use the combination of L foot and Hanger Bolt to increase the height of the bracket to more effectively improve the heat dissipation of the component. The advantage of this installation method is that L feet can be more firmly connected to the purlins. It is suitable for areas with relatively large wind speeds. The scheme is as follows:   You can click the text on the right to get further information about this bracket: Trapezoidal ROOF L Feet Mounting Solutions.   In areas with relatively small wind speed (usually less than 25m/s), we can adopt simple and easy ways to install solar components. Generally, ROOF Attachments and Mini Rail, U Channel Clamp, etc.   As shown in the figure below, by making ROOF Attachments with the shape of TRAPEZOIDAL ROOF Sheet to connect roof sheet and components. Of course, this method must also consider waterproofing problems. It also combines rubber pads and ROOF Attachment.     You can click the text on the right to get further information about this bracket: Trapezoidal ROOF Attachment Mountain System   MINI RAIL and U Channel CLAMP installation method is a more common and simple way to install solar panels. MINI RAIL and U Channel CLAMP will have a predetermined hole to be installed quickly. The role of fast installation. The advantages of these two installation methods are simple, convenient, and low cost. As shown in the figure below:                                                                                   (MINI RAIL installation method) You can click the text on the right to get further information about this bracket: Mini Rail Mountain Solution                                                                                    (U Channel Clamp installation method) You can click the text on the right to get further information about this bracket: U Rail mounting solution   2, Corrugated ROOF Sheet The installation method of Corrugated ROOF Sheet is basically similar to the TRAPEZOIDAL ROOF Sheet. In a relatively large wind speed areas, we can use L Feet, L Feet +Hanger Bolt to achieve installation. You can also use the special ROOF Attachment +RAIL method to use it Installation, as shown below:   You can click the text on the right to get further information about this bracket: Corrugated ROOF MOUNTING SYSTEMS   Similarly, MINI RAIL and U Channel Clamp are also suitable for Corrugated ROOF Sheet, which are simple, flexible and easy to use.   3, Standing Seam ROOF Sheet  Standing SEAM ROOF Sheet Due to his structural characteristics, we usually purchase the ROOF Attachment method to achieve installation. The feature of this installation method is simple. There is no need to damage the roof and the cost is low. As shown below:   You can click the text on the right to get further information about this bracket: Standing Seam Metal ROOF MOUNTING SYSTEMS   In actual installation, there may be restrictions on different factors, such as wind and snow pressure, building structure, etc. We can adjust and redesigned the brackets according to the actual situation to achieve safe installation. 

Landpower Corrugated Roof Mounting designed for corrugated steel roof sheet or corrugated fibre cement roof, we offer various mounting solutions for corrugated roof both railling system and rail-less systems. We design specially base clamp for the roofs, and L feet bracking with corrugated shape and hanger bolt for the roof, we have mini rail(rail-less) for both landscape and portrait layout installation. TECHNICAL INFORMATIONInstall site ：Corrugated RoofTilt Angle ：Flushed with the roof （10~60 deg）Building Height：20 mMax Wind Speed：<60m/sSnow Load：<1.4KN/m2Standard ：AS/NZS 1170 and other international StandardMaterial ：High Class Aluminum alloy Al6005-T5& Stainless steel 304Color: Natural or CustomizedAnticorrosive: anodized aluminum & stainless steelWarranty：Ten years warranty and twenty- year service life Landpower Corrugated Roof Mounting are suiable for below roof sheet:       We design vaious Corrugated roof attachments,please feel free to email  us your roof infomatin.     Corrugated Roof Optional Solutions                                                                   (Base Clamp Corrugated Roof Solutions)                                                                 (L-Feet Corrugated Roof Solutions)                                                                      (Hanger Bolt-L feet Corrugated Roof Solutions)     Project Reference(click here): Landpower PVC Corrugated Roof MW Project.     We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.