Landpower Shingle Roof Solar Mounting System is especially engineered for asphalt shingle roof. It highlight the component of universal PV Roof Flashing which is water tight and durable and compatible for most of roof racking. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and PV mount flashing, our Shingle Roof Mounting is not only making the module installation easy and save time but also minimizing damage to the roof.  TECHNICAL INFORMATIONInstall site ：Shingle Roof                                           Tilt Angle ：Flushed with the roof （10~60 deg）Building Height：20 mMax Wind Speed：<60m/sSnow Load：<1.4KN/m2Standard ：AS/NZS 1170 and other international StandardMaterial ：High Class Aluminum alloy Al6005-T5& Stainless steel 304Color: Natural or CustomizedAnticorrosive: anodized aluminum & stainless steel Warranty：Ten years warranty and twenty- year service life COMPONENT OVERVIEW Our PV Flashing is engineered and designed for fast installation. it is water tight and durable for any composite. This PV Flashing kit is compatible for most of solar racking, the main components are below:                                         PV Flashing                           AL Base               L-Bracket           Standoff               Hex Cap          Lag Bolt BENEFITS1, Fast InstallationComing with PV mount flashing, there’s no need for trimming shingles, just drill one hole into rafter backfilling sealant and slide the PV flashing beneath shingle, drive the bolt home, and it is done. The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and L bracket to guarantee a fast and easy installation process.2, Save ApplicationEquip with PV flash, there's no shingle cutting and no shingle distortion caused by trying to force a fit. Just a permanent, watertight mount every time!3, EconomicalThe mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.4, Long lifespan All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.   We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.

Landpower EAST/West Ballasted Roof Solar Mounting System is specifically engineered for non-penetration roofs, which secures the array without damaging the flat roof. It is compatible with both framed photovoltaic modules and unframed thin film modules. This economical system requires no roof penetration and made from lightweight and strong aluminum construction and come with pre-assembled components, they are just require few tools, it is quick and easy to install.TECHNICAL INFORMATIONInstall site ：Flat RoofTilt Angle ： 5-10degModule Orientation: LandscapeBuilding Height：<20 mMax Wind Speed：<60m/sSnow Load：<1.4KN/m2Distributed weight: 10~25 kg/m2Standard ：AS/NZS 1170 and other international StandardMaterial ：High Class Aluminum alloy Al6005-T5& Stainless steel fastenColor: Natural Warranty：Ten years warranty and twenty years’ service life.   APPLICATION   BENEFITS1, Minimize Roof Space LimitationThe double-sided design of this ballasted mounting system let the solar module mounted in “shoulder by shoulder” which maximize roof arrays due to no shading spaces, therefore it optimize high power production.2, Minimize Orientation LimitationIt is specially engineered with double-sided configuration to ensure solar module   to expose sunshine as long as possible in any directions. It’s suitable for all orientations installations.3, Fast InstallationIt is highly engineered and simplified ballasted mounting system, which   reduced number of components without module carrier rail, just direct clamping with ballasted base and tighten the bolts, everything is been done.4, EconomicalThe mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.5, Long lifespan All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and complete recyclability, they are designed for twenty-year service life and backed by ten years warranty.   INSTALLATION VIDEO       Project Reference(click here): Landpower East/West Flat Roof MW Project.   Landpower is leading manufacturer of solar mounting in China, We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.